715-2000 Vacuum Valve Systems
The TEC 715-2000 Vacuum Valve Systems were developed by TEC for use in autoclaves, ovens or similar processes. The 715-2000 Vacuum Valve System contains features, which are essential to meet cure parameters.
Note: The 715-200 valve will efficiently capture many of the material volatiles and solvents emitted from resin systems being processed. Federal and local environmental regulations may limit the allowable exposure or disposal of these captured materials. The responsibility of compliance is on the operator and the regulations are subject to local interpretation.
System Configurations
The 715-2000 Vacuum Valve System incorporates a selector valve that can be configured to select from vacuum, block or vent. The selector valves are conical, large area poppet seats manufactured from Teflon. These seats are extremely contamination and temperature resistant. Modular configuration allows stacking of up to 6 valves and connection blocks at each end for air and vacuum cooling lines.
Cooling System
The 715-2000 Vacuum Valve System is fitted with internal water/glycol cooling ports that provide cooling for the integral resin trap, valve seats and inlet ports. This cooling allows the valve to withstand high temperature gases and volatiles entering the valve. When the proper chilling system temperature is selected for the materials processed, the trap can efficiently capture volatiles and by-products from the curing process.
Service and Cleaning
The valves can be easily serviced in place and all seals can be replaced without removing the valve from it's mounting position. This also allows for easy cleaning, inspection and maintenance of the valve in it's installed location. Click here to request more information...
